“Like riding on rail road tracks… Wheels run about $750 apiece, tires are $100 apiece if purchasing Sumitomo HTRZ. $350 for Goodyear Eagle F1s. Both wear the same.”
– black94t on mr2.com
This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!
“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15”
– SlAMMEdtAC0 on customtaco.com
Front Wheel Tucked to the Lip…
This truck gets driven hard, not just for hard parking…
This Tacoma looks good from the rear too
1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!
– Wheels: 5zigen fn01rc 17×10 25mm spacers
– Tires: 205/40/17
This model Toyota Corolla is not the most popular model for modifying, yet alone to be stanced. This
Toyota Corolla was caught outside the Fuji Speedway at the HellaFlush Japan Event. It appears to be
wearing 15″ CST Demon Camber wheels; I believe they only came in 15″ and 16″, and I don’t think
16″ Demon Cambers came with multi lug.
Tucking tire all around, looking pretty clean!
Rear view, good amount of of camber on the rear.
Specs: MA61 Toyota Supra
Front: RA65 struts cut 60mm with SW20 shocks
Rear: TRD blues with AJPS 6KG springs.
Front: Watanabe R-Type 15 x 8.5 -14
Rear: 15 x 9.5 -16
Tires: 195/55/15 all around
I have a huge fetish for minitrucks on fresh JDM wheels. This supreme 2001 Toyota Tacoma fills that fetish for me and belongs
to internet user Modtaco. Unique to this truck are the 4″ flares on the rear filled with some really deep 11.5″ wide Work Meisters,
and a custom bag setup that currently pancakes the rear but also brings don the front nicely. The front features 4wd fenders
that house 10″ wide Meisters. The truck is still a work in progress, but it looks really hot as is. – JDM Truck: Toyota Tacoma on Work Meister S1
JDM Truck: Toyota Tacoma on Work Meister S1
“Here's mine. It's a 2001 tacoma with 18×10 & 18×11.5 WORK Meister wheels, custom disk brakes, widebodied,
fully built engine with standalone management and a GT35R turbo, 3″ side exit exhaust, JDM ITR seats…”
“…the 18×9 and 18×11 Work Wheels that evan brought back from Japan as checked luggage.”
– Ben Da Pirate – Minitruckin Magazine
“The wheels are 18″ WORK XSA-01T. They are 3 piece and are 9″ wide in front with 245/45/18 rubber and 10″ wide in the rear with 275/40/18.”
Current Wheels: 18x10F 18×11.5R WORK Meister wheels
Old Wheels: 18x9F 18x10R WORK XSA-01T
Brakes: Phatty's Big Brake Kit
Interior: JDM ITR Recaro
Engine: 2.4L GT35R Standalone