The IMPUL NS-01R Wheels are light weight JDM Wheels specifically for Nissan Vehicles. The IMPUL NS-01R Wheels are one piece forged jdm wheels which were initially made in two sizes 17×7.5 +35 and 17×8.5 +38 in 5×114.3. Also pictured is the IMPUL 634S Body Kit for the Y34 Nissan Cedric / Y34 Nissan Gloria on IMPUL M20 Wheels.
The EOS Division are 6 spoke JDM Wheels made by Speedstar Racing. The EOS feature 2 piece construction with exposed lug nuts. Sizing on the EOS varied from 16×7 +49 all the way to a wide 17×9.5 +43, however I suspect the 17×9 +19 might have a nicer look. Pictured are the EOS Division on a R32 Nissan Skyline GT-R. Also featured are the 5 spoke “hammer” style EOS-D on a Nissan Gloria.
The Desmond Promoda Cresendo are JDM Wheels that have more of a VIP flare to them. Full thick spokes give a spartan look, and Gold Bolts and Logos give it that luxurious look. Desmond is of course known for their Regamaster line of wheels, this is one of their more rare offerings. Pictured are the Desmond Promoda Cresendo on a Y32 Nissan Gloria.
Carving Stark I, Carving Stark II, Carving Stark III – The Carving Stark Wheels are JDM Wheels targetted to the European Market; I actually have sseen some end up in Germany. They Carving Stark series are also the JDM Wheel series with the infamous Twist, they are directional to each side. The ad shows Carving Stark II on a Toyota Soarer, Carving Stark I on a Nissan Gloria, an Carving Stark III on a Nissan Fairlady Z 300ZX Z32. The German Print on the advertisement translates to “The rims of the brand “Stark [Strong]” stand for German history and tradition that stems from the cradle of European Cars and improve the handling of your car.”Carving Stark I, Carving Stark II, Carving Stark III – Here is a close up of the wheel portion of the ad; please excuse the poor scan. I believe the Stark I is offered in 15″ and 16″ Sizes, and the Stark II and III are offered in 16″ & 17″ sizing. The Carving Starks are in fact Manufactured by JDM Wheel Manufacturer Work Wheels.
