Category Archives: JDM

BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla

BBS RS on Nissan Skyline R32 Skyline GT-R
This R32 Nissan Skyline GT-R on sittin’ on BBS RS is probably the Classiest R32 GT-R I have set my eyes on. The silver on silver adds to the classiness. Look at that reflection the BBS RS’s are gleaming to the asphalt. This car’s look is timeless, this GT-R will always look good!

 

BBS RS on Nissan Skyline R32 Skyline GT-R

“They’re BBS RS 17 by 9 all around. With spacers they’re around -5 offset.”
– “The J” on gtr.co.uk

 

BBS RS on Nissan Skyline R32 Skyline GT-R

These next few pictures are with the car raiseed about half an inch. Apparently the owner had an issue with axles.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

The fitment with these BBS RS’s is tight, you can see how close the tires are to the wheel wells.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

Classy!

 

BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 

 These are some older pictures with no center caps on the BBS RS, still looks legit! I believe the ride height is even lower than the previous pictures.

 

 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2

 No tire stretching on these BBS RS’s, these tires look meaty and they mean business!

Specs
Nissan Skyline R32 Skyline GT-R Vspec 2

Wheels: 17 x 9 BBS RS with Spacers, Final offset -5
Tires: Dunlop Direzza Z1 245/40/17
Suspension: G.A.B. Sport dampers, NISMO Tie Rods and Upper Control Arms
Exterior: NISMO N1 air ducts, bonnet lip, skirts, rear mud spats, and N1 headlights
Power Upgrades: HKS downpipes, HKS silent HiPower Exhaust, Blitz Boost Controller

Continue Reading “BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla” »

JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15”
– SlAMMEdtAC0 on customtaco.com

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

Front Wheel Tucked to the Lip…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This truck gets driven hard, not just for hard parking…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This Tacoma looks good from the rear too

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC

1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!

Specs
– Wheels: 5zigen fn01rc 17×10 25mm spacers
– Tires: 205/40/17

Continue Reading “JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC” »

CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla

CST Demon Camber JDM AE100 Toyota Corolla

This model Toyota Corolla is not the most popular model for modifying, yet alone to be stanced. This
Toyota Corolla was caught outside the Fuji Speedway at the HellaFlush Japan Event. It appears to be
wearing 15″ CST Demon Camber wheels; I believe they only came in 15″ and 16″, and I don’t think
16″ Demon Cambers came with multi lug.

CST Demon Camber JDM AE100 Toyota Corolla

Tucking tire all around, looking pretty clean!

CST Demon Camber JDM AE100 Toyota Corolla

Rear view, good amount of of camber on the rear.

Continue Reading “CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla” »

SSR Formula Mesh on Mazda FC RX7 – Clean and Simple

SSR Formula Mesh on Mazda FC RX-7

With everyone trying to get the fattest lip under their fenders, this FC Mazda RX7 is refreshing to look at with it’s nomal fitting
17″ SSR Formula Mesh. This 7 looks like it can be daily driven with no problems due to its civilized fitment.

 

SSR Formula Mesh on Mazda FC RX-7

Wheels are SSR Formula Mesh measuring 17×7 +32F and 17×8+32 Rear. Ichiba Spacers bring the wheels out a bit.

 

SSR Formula Mesh on Mazda FC RX7

Exhaust gasses expelled through Racing Beat Y pipe and Mufflers.

“Powered by max coilovers. dropped 800$ on a brand new pair. good times. …
… oh i love my coils. love the adjustments on it. in back im negative 3 camber in front im negative 2….
rears are 17×8 +32 and fronts are 17×7 +32”
-Celestial_Fc on rx7club.com

 

SSR Formula Mesh on Mazda FC RX7

This pic looks to be pre spacer, still clean.

 

Dandy Tanaka RX7 on SSR Formula Mesh

The first time I saw this FC, I though about the Dandy Tanaka Salt Flat RX7 which also blue with SSR Formula Mesh

 

Nardi Classic Steering Wheel Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 Mazda FC RX7

1. Interior Sports a Nardi Classic in Leather
2. 25mm Ichiba spacers sittin flush
3. SSR Formula Mesh not mounted yet
4. Car brought down with Max Coilovers
5. Stock on Coilovers

 

Specs
Mazda RX7 FC
Wheels: SSR Formula Mesh 17×8 +32R fronts, 17×7 +32F with Ichiba v.2 spacers 25mm
Tires: 215/45/17
Exhaust: Racing Beat Y pipe and Mufflers
Suspension: Max Coilovers
Interior: Nardi Claasic Leather
Exterior: S5 Round Tail Lights

Continue Reading “SSR Formula Mesh on Mazda FC RX7 – Clean and Simple” »

Mazda Miata Slammed on SSR MKII

Mazda Miata Slammed on SSR MKII

This Mazda Miata on SSR MKII wheels is one of those cars I see passing on the road on a regular basis. Its bright, its low, its loud
and it definitely turns heads everytime!

Mazda Miata Slammed on SSR MKII

Wheels are SSR MKII 15×9 ET -5all around wrapped in 195/45 tires.  Brembo Rotors,  Hawk HP+ brake pads and Goodridge
SS brake lines help with with the stopping.

 

Mazda Miata Slammed on SSR MKII

Rolled Fenders, a hard top and a variety of JDM Pieces really set this car off.

Mazda Miata Slammed on SSR MKII

The body is brought down with a set of Tein Flex Coilovers with custom springs. Gasses are expelled via a custom catback
exhaust.  Feed style side shirts accentuate the ride height of the car.


Mazda Miata Slammed on SSR MKII  Mazda Miata Slammed on SSR MKII  Mazda Miata Slammed on SSR MKII Mazda Miata Slammed on SSR MKII Mazda Miata Slammed on SSR MKII

1. This miata is half the height to the compared
2. Miata in action on the freeway
3. Representing the SSR MK II ‘s
4. Gassing Up!
5. Interior rock one of those JDM Drift Steering wheel

Specs:

“- Tein flex with custom springs
– Energy Suspension bushings
– Super Now RX-7 tie rod ends
– iConcept inner rods with spacers
– Custom intake
– Custom catback exhaust
– KG Works turn signal intakes
– Hella E-code lamps
– Zoom fuel lid
– Runabout side mirrors
– Cusco rear brace
– Works Bell hub/quick release
– Megan short shifter
– Snap-On shift knob
– AutoPower race bar
– SSR MK2 15×9 ET -5 (195/45 T1Rs)
– Project Kics lug nuts
– OEM front/rear lip
– Feed style side shirts
– Custom skid plate
– Gutted interior
– A/C delete and depowered steering rack
– Exedy racing clutch
– 8lb Fidanza flywheel
– 4.1 Torsen LSD
– Goodridge SS brake lines
– Brembo Rotors
– Hawk HP+ brake pads
– G-String Bikini Top made my Project-G”

– mazdafitment.com

Continue Reading “Mazda Miata Slammed on SSR MKII” »

JDM Truck – BBS RS & Watanabe Wheels on D21 Nissan Hardbody

Nissan Hardbody D21 on BBS RS Wheels

Nissan Hardbody D21 on BBS RS Wheels Nissan Hardbody D21 on BBS RS Wheels Nissan Hardbody D21 on BBS RS Wheels

Straight from Japan is this JDM Truck: a 1994 D21 Nissan Hardbody. First set of pictures feature a nice drop and some 17″ BBS RS Wheels; that a first for me, BBS Wheels on a Hardbody! I wonder if he is running adapters or did a 5 lug conversion.

 

“I am japanese minitrucker!
HARD BODY on BBS RS 17inc wheel

changed wheel now
japan mede wheel
name is
WATANABE 8spoke!!!!!”
-CarDomain.com User “sinz-taco”

Here are the second set of pics, some Camera Phone pics of the Hardbody on the Watanabe Wheels, another first:

Nissan Hardbody D21 on Watanabe Wheels

Nissan Hardbody D21 on Watanabe Wheels Nissan Hardbody D21 on Watanabe Wheels

I hope to see more and find more info on this truck, especially on the Watanabe Wheels!

Specs
1994 Nissan D21 Hardbody Pick-up
Wheels: 17″ BBS RS & ?” Watanabe Wheels
Location: Japan

Continue Reading “JDM Truck – BBS RS & Watanabe Wheels on D21 Nissan Hardbody” »

Mr.Vengeance – S30 71 Datsun 240Z on SSR MK III

S30 71 Datsun 240Z on SSR MK III

This Datsun s30 240Z is owned by Mr. Vengeance of GarageZero, Atlanta GA. It is lowered accordingly to the “Shakotan” style,
has a fresh set of wheels, and some hints of Bozo with the front external mount oil cooler and upswept exhaust pipes. The
SSR MK III wheels he has sourced look to be sized perfect, and his custom suspension set up sounds very interesting!

 

S30 71 Datsun 240Z on SSR MK III

 “Im on some Tien coilovers that have been modified from an Acura.. but they arent the DC2 coils everyone else used.”
-Mr. Vengeance

 

S30 71 Datsun 240Z on SSR MK III

Specs
1971 Datsun 240z [S30]
Wheels: SSR MK III 15×8.5 F 15×9 R
Suspension: Modified Tien Coilovers from an Acura
Drivetrain: L28 Swap with Holley Carb, 5 speed Transmission, RX7 oil cooler

S30 71 Datsun 240Z on SSR MK III S30 71 Datsun 240Z on SSR MK III S30 71 Datsun 240Z on SSR MK III S30 71 Datsun 240Z on SSR MK III

Continue Reading “Mr.Vengeance – S30 71 Datsun 240Z on SSR MK III” »