Honda Odyssey Bagged on 15×10’s Woody Edition

Honda Odyssey Bagged on 15x10
This Bagged Honda Odyssey started and is a low budget project from the guys and gals at Bag Riders out in Vermont; as the name implies they specialize in Air Suspension service and Installations. They scored this van for a mere $200 and went to town on this low budget build up.

 

Honda Odyssey Bagged on 15x10 Front View
The wheels are  15×10 Summit Racing Drag-Thrust’s as they state on Stance Works;  “Our wheels showed up.. The cheapest 15x10s that we could find in our offset…. “

 

Honda Odyssey Bagged on 15x10 Side Shot Night Time
The wood wrap really sets this Honda Odyssey off, it’s a pretty original idea, but really gives this van a unique and clean look.

 

Honda Odyssey Bagged on Playing Limbo
The Woody Odyssey playing Limbo.

 

Bagged Honda Odyssey Rear View
Rear View of the Honda Odyssey, Looks good from all sides.

Specs
Honda Odyssey

Wheels: 15×10 Summit Racing Drag-Thrust
Suspension: Bag Riders Air Bag Setup
Exterior: Wood Wrap

Continue Reading “Honda Odyssey Bagged on 15×10’s Woody Edition” »

Mercedes Benz 280CE W123 on BBS RS – Period Correct Goodness!

Mercedes Benz 280CE W123 on BBS RS
The BBS RS Wheel was first produced in the late 70’s. The Mercedes Benz W123 was also produced in the late 70’s. This Mercedes Benz 280CE puts those two together for a classy period correct automobile.

Continue Reading “Mercedes Benz 280CE W123 on BBS RS – Period Correct Goodness!” »

Toyota MR2 Turbo SW20 on Kinesis K10’s Running 315’s – MEATY!

Toyota MR2 Turbo SW20 on Kinesis K10
This Toyota MR2 Turbo reminds me of a time where people used to try to fit the widest wheels under their fenders instead of todays stretched tire trend. Rear wheel is 11 inches wide wrapped in a majorly FAT 315/35/17 tire… talk about tread! – Toyota MR2 Turbo SW20 on Kinesis K10

Toyota MR2 Turbo SW20 on Kinesis K10

“Like riding on rail road tracks… Wheels run about $750 apiece, tires are $100 apiece if purchasing Sumitomo HTRZ. $350 for Goodyear Eagle F1s. Both wear the same.”
– black94t on mr2.com

 

Toyota MR2 Turbo SW20 on Kinesis K10
This Toyota MR2 Turbo has nice stance, Kenesis K10 wheels are a nice touch, wheels that you don’t hear of too often. – Toyota MR2 Turbo SW20 on Kinesis K10
Toyota MR2 Turbo SW20 on Kinesis K10
Toyota MR2 Turbo SW20 on Kinesis K10
Toyota MR2 Turbo SW20 on Kinesis K10
Rear Shot: Wide SW20! – Toyota MR2 Turbo SW20 on Kinesis K10

 

Toyota Corolla AE86 on SSR MKII & SSR MKIII & More

Toyota Corolla AE86 on SSR MKII
A friend and I were having a conversation on the Toyota Corolla AE86′s and started looking for the best examples. The first 86 to come to mind was this one I saw on Club4AG. The owner did a full build on it, and surprisingly it is actually an SR5 model. The owner also has had myriad of wheels for it; SSR MKII, SSR MKIII, 2 sets of Volk Racing TE37, and Weds Sport MA86. I personally think the MKII’s give it that best old school look.

AE86 Toyota Corolla on SSR MKII

Another shot with the AE86 on SSR MKII

SSR MKII

SSR MKII, Looks so nice all by itself

 

AE86 on SSR MKIII, another nice set of wheels

AE86 on SSR MKIII, another nice set of wheels

 

AE86 on SSR MKIII, Lip looks healthy on the rear.

AE86 on SSR MKIII, Lip looks healthy on the rear on this shot.

 

 

Continue Reading “Toyota Corolla AE86 on SSR MKII & SSR MKIII & More” »

BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla

BBS RS on Nissan Skyline R32 Skyline GT-R
This R32 Nissan Skyline GT-R on sittin’ on BBS RS is probably the Classiest R32 GT-R I have set my eyes on. The silver on silver adds to the classiness. Look at that reflection the BBS RS’s are gleaming to the asphalt. This car’s look is timeless, this GT-R will always look good!

 

BBS RS on Nissan Skyline R32 Skyline GT-R

“They’re BBS RS 17 by 9 all around. With spacers they’re around -5 offset.”
– “The J” on gtr.co.uk

 

BBS RS on Nissan Skyline R32 Skyline GT-R

These next few pictures are with the car raiseed about half an inch. Apparently the owner had an issue with axles.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

The fitment with these BBS RS’s is tight, you can see how close the tires are to the wheel wells.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

Classy!

 

BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 

 These are some older pictures with no center caps on the BBS RS, still looks legit! I believe the ride height is even lower than the previous pictures.

 

 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2

 No tire stretching on these BBS RS’s, these tires look meaty and they mean business!

Specs
Nissan Skyline R32 Skyline GT-R Vspec 2

Wheels: 17 x 9 BBS RS with Spacers, Final offset -5
Tires: Dunlop Direzza Z1 245/40/17
Suspension: G.A.B. Sport dampers, NISMO Tie Rods and Upper Control Arms
Exterior: NISMO N1 air ducts, bonnet lip, skirts, rear mud spats, and N1 headlights
Power Upgrades: HKS downpipes, HKS silent HiPower Exhaust, Blitz Boost Controller

Continue Reading “BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla” »

JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15”
– SlAMMEdtAC0 on customtaco.com

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

Front Wheel Tucked to the Lip…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This truck gets driven hard, not just for hard parking…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This Tacoma looks good from the rear too

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC

1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!

Specs
– Wheels: 5zigen fn01rc 17×10 25mm spacers
– Tires: 205/40/17

Continue Reading “JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC” »

CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla

CST Demon Camber JDM AE100 Toyota Corolla

This model Toyota Corolla is not the most popular model for modifying, yet alone to be stanced. This
Toyota Corolla was caught outside the Fuji Speedway at the HellaFlush Japan Event. It appears to be
wearing 15″ CST Demon Camber wheels; I believe they only came in 15″ and 16″, and I don’t think
16″ Demon Cambers came with multi lug.

CST Demon Camber JDM AE100 Toyota Corolla

Tucking tire all around, looking pretty clean!

CST Demon Camber JDM AE100 Toyota Corolla

Rear view, good amount of of camber on the rear.

Continue Reading “CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla” »



JDM Wheels and Trends Archive