
The first generation Toyota Tacoma is a popular pickup truck to lower and throw some wheels on. The sleek body style looks nice when modded with its flared fenders, and lowering the trucks is relatively easy with blocks and springs. – JDM Truck: Toyota Tacoma Slammed on BBS RS

This Toyota Tacoma has a really nice look with a nice 6″ drop and a set of shiny BBS RS wheels. The body has also been redone and painted a nice bold hue of blue. – JDM Truck: Toyota Tacoma Slammed on BBS RS

Front BBS RS wheel specification is 17×8 +7 wrapped in 205/40/17. The lips have been polished out and half height center caps installed on the wheels. – JDM Truck: Toyota Tacoma Slammed on BBS RS

Rear BBS RS wheel specification is 17×9 +27 wrapped in 215/40/17. The blue paint looks pretty deep in the night time in this shot. – JDM Truck: Toyota Tacoma Slammed on BBS RS

Rear of the truck, this mini truck looks really smooth and clean especially with the relocated plate. – JDM Truck: Toyota Tacoma Slammed on BBS RS

The appropriately sized BBS RS wheels and drop on this pickup truck give it a nice stance, and a look unique from other trucks. – JDM Truck: Toyota Tacoma Slammed on BBS RS
Continue reading “JDM Truck – Toyota Tacoma Slammed on BBS RS” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comment (0)

The Toyota Tacoma was introduced as Toyota’s new pickup truck with more comfort features while the rest of the world continued to get the hilux. Styling on the newer Tacoma is great, the flared front fenders and bedsides makes the Tacoma look sporty. – Toyota Tacoma on GP Gold BBS LM

This Toyota Tacoma is moderately lowered on a set of BBS LM wheels in GP Gold; a very unique choice for a vehicle as utilitarian as this pickup truck. The BBS LM is a very high end forged wheel usually fitted to sports cars, and due to the price Luxury Vehicles as well. – Toyota Tacoma on GP Gold BBS LM

The Specs on these BBS LM wheels are Front: 17×8 +24 205/45/17 & Rear: 17×9 +24 215/45/17. – Toyota Tacoma on GP Gold BBS LM

The BBS LM is a beautiful wheel, and it look great on anything. This set of BBS LM are reverse mounted, in which the face is mounted behind the register of the wheel. The reverse mount option give almost 20mm less offset for a more aggresive stance, but I think it makes the wheel look better overall with the illusion of smaller spokes. – Toyota Tacoma on GP Gold BBS LM

This is probably the classiest looking Toyota Tacoma I have seen so far. Nice wheels and not too low; it looks like an actual sports truck. – Toyota Tacoma on GP Gold BBS LM

This is the original above image of the mini truck. – Toyota Tacoma on GP Gold BBS LM
Continue reading “JDM Truck – Toyota Tacoma on GP Gold BBS LM” »
Filed under: Euro, JDM, Trucks Vans & Wagons, Wheels | Comment (0)

This is the most epic Drift Truck Build I have seen. Full Tube Chassis custom from the ground up everything, even the body has been massaged to the right proportions to give, not to mention least of things the stance is perfect on this Toyota Truck. All this work was done by the crew at Engineered To Slide ( http://engineeredtoslide.com/ ) down in Austrailia. – JDM Truck – Toyota Hilux Tube Chassis Drift Build

This truck sits on a nice set of BIM DriftMaster Wheels, I don’t see a lot of those around. JDM Truck – Toyota Hilux Tube Chassis Drift Build

Check out that SR20, that engine in itself has is an Amazing Build! JDM Truck – Toyota Hilux Tube Chassis Drift Build

Front Half of the Tube Chassis, I’m sure many hours have been spent on this! JDM Truck – Toyota Hilux Tube Chassis Drift Build

The back half of the Hilux. All the work and attention to detail is awesome! I really like the exhaust and diffuser setup too. – JDM Truck – Toyota Hilux Tube Chassis Drift Build

A lot of work was done getting the “Bed” to fit on and to get the wheel wells positioned perfect. – JDM Truck – Toyota Hilux Tube Chassis Drift Build

Looks Mean from the Rear – JDM Truck – Toyota Hilux Tube Chassis Drift Build
Continue reading “JDM Truck – Toyota Hilux Tube Chassis Drift Build” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comment (0)

This Toyota Tacoma X-Runner is dropped nicely on a set of Enkei RPF1 Wheels. You don’t see too many X-runners around these days and this is definitely a nice one! Suspension mods include a multi-link rear end with coilovers and fenders are definitely rolled to give this truck a nice stance. - JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1

Another Shot, slightly different angle, The paint on this truck is stock, but really nice. Enkei RPF1 wheels are 18×10.5″ +15 wrapped in 275/40/18 tires. - JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1

Side View of the Tacoma X-Runner, these trucks are actually pretty big in size. - JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1

So fresh and So Clean! – JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1

Trick Stuff here: Multi-Link with Coilovers and upgraded Sway Bars; this is a pretty nice setup. - JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1

Cool shot of the X-Runner with the bed off. Under the hood is actually a TRD Supercharger that produced 342 whp and 360 tq. - JDM Truck: Toyota Tacoma X-Runner on Enkei RPF1
Continue reading “JDM Truck – Toyota Tacoma X-Runner on Enkei RPF1” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comment (0)

I spotted this 2JZ Toyota Tacoma S-Runner on Supratruck.com. Already a rare truck, this one produces 660 hp & 630 ft-lbs tq at the crank. Massive 19″ Racing Hart Wheels fit nicely in the wheel wells. A TRD Body Kit and XRunner Hood Scoop give this truck an aggressive look. - JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX

This Truck is lowered a moderate 3″ all around. New increased rate coil springs in the front, 3″ lowered leaves with Speed-Trac Bars in the back; Tokico Gas shocks and Stabilizer bars all around give this truck a nice stance. - JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX

Rear Shot of the S-Runner, this is an amazing truck! - JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX

Racing Hart CX 19X8.5 wrapped in Pirelli P-Zero Rosso Front

Racing Hart CX 19X9.5 wrapped in Pirelli P-Zero Rosso Front

Modified Magazine Feature. - JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX
Continue reading “JDM Truck – 2JZ Toyota Tacoma S-Runner on Racing Hart CX” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comment (1)

This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!

“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15″
- SlAMMEdtAC0 on customtaco.com

Front Wheel Tucked to the Lip…

This truck gets driven hard, not just for hard parking…

This Tacoma looks good from the rear too

1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!
Specs
- Wheels: 5zigen fn01rc 17×10 25mm spacers
- Tires: 205/40/17
Continue reading “JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comments (2)

I have a huge fetish for minitrucks on fresh JDM wheels. This supreme 2001 Toyota Tacoma fills that fetish for me and belongs
to internet user Modtaco. Unique to this truck are the 4″ flares on the rear filled with some really deep 11.5″ wide Work Meisters,
and a custom bag setup that currently pancakes the rear but also brings don the front nicely. The front features 4wd fenders
that house 10″ wide Meisters. The truck is still a work in progress, but it looks really hot as is. - JDM Truck: Toyota Tacoma on Work Meister S1

JDM Truck: Toyota Tacoma on Work Meister S1
“Here's mine. It's a 2001 tacoma with 18×10 & 18×11.5 WORK Meister wheels, custom disk brakes, widebodied,
fully built engine with standalone management and a GT35R turbo, 3″ side exit exhaust, JDM ITR seats…”
- modtaco

Wide stance on the front

While Taco Supreme looks really aggressive, it also packs a punch with a GT35R pushing the 325hp out of the stock 2.4.

Readers Rides section of Minitruckin Magazine September, 2009. The following quote is really impressive to me:
“…the 18×9 and 18×11 Work Wheels that evan brought back from Japan as checked luggage.”
- Ben Da Pirate – Minitruckin Magazine

Check out the rear flare, the old rims didnt fill.

“The wheels are 18″ WORK XSA-01T. They are 3 piece and are 9″ wide in front with 245/45/18 rubber and 10″ wide in the rear with 275/40/18.”
- modtaco

Specs
Current Wheels: 18x10F 18×11.5R WORK Meister wheels
Old Wheels: 18x9F 18x10R WORK XSA-01T
Brakes: Phatty's Big Brake Kit
Interior: JDM ITR Recaro
Engine: 2.4L GT35R Standalone
Continue reading “JDM Truck – Modtaco's Toyota Tacoma on Work Meister S1” »
Filed under: JDM, Trucks Vans & Wagons, Wheels | Comments Off