Category Archives: Trucks Vans & Wagons

JDM Truck – 2JZ Toyota Tacoma S-Runner on Racing Hart CX

2JZ Toyota Tacoma S-Runner on Racing Hart CX
I spotted this 2JZ Toyota Tacoma S-Runner on Supratruck.com. Already a rare truck, this one produces 660 hp & 630 ft-lbs tq at the crank. Massive 19″ Racing Hart Wheels fit nicely in the wheel wells. A TRD Body Kit and XRunner Hood Scoop give this truck an aggressive look. – JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX
2JZ Toyota Tacoma on Racing Hart CX
This Truck is lowered a moderate 3″ all around. New increased rate coil springs in the front, 3″ lowered leaves with Speed-Trac Bars in the back; Tokico Gas shocks and Stabilizer bars  all around give this truck a nice stance. – JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX
2JZ Toyota Tacoma on Racing Hart CX
Rear Shot of the S-Runner, this is an amazing truck! – JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX
2JZ Toyota Tacoma on Racing Hart CX
Racing Hart CX 19X8.5 wrapped in Pirelli P-Zero Rosso Front
2JZ Toyota Tacoma on Racing Hart CX
Racing Hart CX 19X9.5 wrapped in Pirelli P-Zero Rosso Front
2JZ Toyota Tacoma on Racing Hart CX in Modified Magazine
Modified Magazine Feature. – JDM Truck: Toyota Tacoma S-Runner on Racing Hart CX

Continue reading JDM Truck – 2JZ Toyota Tacoma S-Runner on Racing Hart CX

Mercedes Benz E320 Estate W124 on BBS RS – Classy Wagon

Mercedes Benz E320 Estate W124 on BBS RS
This W124 Mercedes Benz E320 Estate is dumped on a set of Custom set 16″ BBS RS. The whole car has a nice clean classy look with the two tone color combo and the polished wheels.
Mercedes Benz E320 Estate W124 on BBS RS
This Benz Wagon is Nice and Simple.
BBS RS rear wheel spec: 16 x 9.5" -31
Rear wheel spec on the BBS RS is 16 x 9.5″ -31
Mercedes Benz E320 Estate W124 on BBS RS
From the front…
Mercedes Benz E320 Estate W124 on BBS RS
Rollin Shot of the W124
Mercedes Benz E320 Estate W124 on BBS RS
Rear Shot, a little bit of poke, its ok… Bye!

Continue reading Mercedes Benz E320 Estate W124 on BBS RS – Classy Wagon

JDM Truck – Toyota Tacoma on Watanabe Wheels

JDM Truck - Toyota Tacoma on Watanabe Wheels
This  JDM Truck, a first generation Toyota Tacoma in Japan, is on slammed in a set of Watanabe Wheels. Being this low, this Toyota Tacoma looks to be bagged. The Watanabe wheels tuck really deep in to the wheel wells, giving this truck a low stance.  Behind the front grill appears to sit a large intercooler so it’s probably safe to assume this truck is Turbo. – JDM Truck: JDM Toyota Tacoma on Watanabe Wheels

 

JDM Truck – 1987 Toyota Pickup Stanced on 15×8 Zero Offset

JDM Truck - 1987 Toyota Pickup Stanced
Many trucks on the net have that bagged layin frame minitruck look, this 1987 Toyota Pickup from Los Angeles does it different. Gold Wheels with nice lips and tires to the fenders give it that JDM stanced look.
JDM Truck - 1987 Toyota Pickup Stanced
Owner chillin in the truck, this Toyota truck looks to be set at the right height.
JDM Truck - 1987 Toyota Pickup Stanced
This Toyota Pickup has had its fenders rolled to fit the meaty tires.
JDM Truck - 1987 Toyota Pickup Stanced
Great urban shot against the Los Angeles Skyline.
JDM Truck - 1987 Toyota Pickup Stanced
Front wheels are 15×8 0 offset, so are the rear.
JDM Truck - 1987 Toyota Pickup Stanced
Rear shot of the 1987 Toyota Pickup.

Continue reading JDM Truck – 1987 Toyota Pickup Stanced on 15×8 Zero Offset

Honda Odyssey Bagged on 15×10’s Woody Edition

Honda Odyssey Bagged on 15x10
This Bagged Honda Odyssey started and is a low budget project from the guys and gals at Bag Riders out in Vermont; as the name implies they specialize in Air Suspension service and Installations. They scored this van for a mere $200 and went to town on this low budget build up.

 

Honda Odyssey Bagged on 15x10 Front View
The wheels are  15×10 Summit Racing Drag-Thrust’s as they state on Stance Works;  “Our wheels showed up.. The cheapest 15x10s that we could find in our offset…. “

 

Honda Odyssey Bagged on 15x10 Side Shot Night Time
The wood wrap really sets this Honda Odyssey off, it’s a pretty original idea, but really gives this van a unique and clean look.

 

Honda Odyssey Bagged on Playing Limbo
The Woody Odyssey playing Limbo.

 

Bagged Honda Odyssey Rear View
Rear View of the Honda Odyssey, Looks good from all sides.

Specs
Honda Odyssey

Wheels: 15×10 Summit Racing Drag-Thrust
Suspension: Bag Riders Air Bag Setup
Exterior: Wood Wrap

Continue reading Honda Odyssey Bagged on 15×10’s Woody Edition

JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15”
– SlAMMEdtAC0 on customtaco.com

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

Front Wheel Tucked to the Lip…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This truck gets driven hard, not just for hard parking…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This Tacoma looks good from the rear too

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC

1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!

Specs
– Wheels: 5zigen fn01rc 17×10 25mm spacers
– Tires: 205/40/17

Continue reading JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC

Bagged Volkswagen Vanagon on Gotti Etoile

Volkswagen Vanagon on Gotti Etoile

Lowered Vans get me very excited. Although pictures of this Volkswagen Vanagon have been on the net for a while now on
Airsociety.net, Ive only seen it lately and can’t stop looking at it, I am intrigued. It is bagged, and the complex suspension
has been majorly redone, even the engine has been raised to accomidate the new height.

 

Volkswagen Vanagon on Gotti Etoile

“What’s keeping this car both lifted and lowered at the same time is a set of Air Lift 2500 fronts and 3500 rears. Dual
ViAir 450c compressors sit neatly out back hooked up to a 3 and 5 gallon tank. You read right, dual tanks. He also raised
the 2.0L ABA OBD1 Turbo motor up higher in the engine bay to give him better clearance when aired out. Talk about dedication!”
– Ricky J airsociety.net

 

Volkswagen Vanagon on Gotti Etoile

Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile

1. Up on all 4’s
2. Front Wheel
3. Rear Wheel, who would of thought 11’s would fit?
4. Face redone
5.  Even the bolts got a fresh coat!

Specs
Wheels
– Gotti Etoile (J55A / C)
– 17×8 ~ +25 5×130 Front
– 17×11 ~ +32 5×130 Rear
– 5×112 to 5×130 adapter

Tires
– Front are Nankang NS-IIs 205/45/17s
– Rear tires are Capitol UHP 245/40/17s

Continue reading Bagged Volkswagen Vanagon on Gotti Etoile