Toyota Corolla AE86 on SSR MKII & SSR MKIII & More

Toyota Corolla AE86 on SSR MKII
A friend and I were having a conversation on the Toyota Corolla AE86′s and started looking for the best examples. The first 86 to come to mind was this one I saw on Club4AG. The owner did a full build on it, and surprisingly it is actually an SR5 model. The owner also has had myriad of wheels for it; SSR MKII, SSR MKIII, 2 sets of Volk Racing TE37, and Weds Sport MA86. I personally think the MKII’s give it that best old school look.

AE86 Toyota Corolla on SSR MKII

Another shot with the AE86 on SSR MKII

SSR MKII

SSR MKII, Looks so nice all by itself

 

AE86 on SSR MKIII, another nice set of wheels

AE86 on SSR MKIII, another nice set of wheels

 

AE86 on SSR MKIII, Lip looks healthy on the rear.

AE86 on SSR MKIII, Lip looks healthy on the rear on this shot.

 

 

Continue Reading “Toyota Corolla AE86 on SSR MKII & SSR MKIII & More” »

BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla

BBS RS on Nissan Skyline R32 Skyline GT-R
This R32 Nissan Skyline GT-R on sittin’ on BBS RS is probably the Classiest R32 GT-R I have set my eyes on. The silver on silver adds to the classiness. Look at that reflection the BBS RS’s are gleaming to the asphalt. This car’s look is timeless, this GT-R will always look good!

 

BBS RS on Nissan Skyline R32 Skyline GT-R

“They’re BBS RS 17 by 9 all around. With spacers they’re around -5 offset.”
– “The J” on gtr.co.uk

 

BBS RS on Nissan Skyline R32 Skyline GT-R

These next few pictures are with the car raiseed about half an inch. Apparently the owner had an issue with axles.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

The fitment with these BBS RS’s is tight, you can see how close the tires are to the wheel wells.

 

BBS RS on Nissan Skyline R32 Skyline GT-R

Classy!

 

BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 

 These are some older pictures with no center caps on the BBS RS, still looks legit! I believe the ride height is even lower than the previous pictures.

 

 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2 BBS RS on Nissan Skyline R32 Skyline GT-R Vspec 2

 No tire stretching on these BBS RS’s, these tires look meaty and they mean business!

Specs
Nissan Skyline R32 Skyline GT-R Vspec 2

Wheels: 17 x 9 BBS RS with Spacers, Final offset -5
Tires: Dunlop Direzza Z1 245/40/17
Suspension: G.A.B. Sport dampers, NISMO Tie Rods and Upper Control Arms
Exterior: NISMO N1 air ducts, bonnet lip, skirts, rear mud spats, and N1 headlights
Power Upgrades: HKS downpipes, HKS silent HiPower Exhaust, Blitz Boost Controller

Continue Reading “BBS RS on Nissan Skyline R32 Skyline GT-R VSpec 2 – Classy Godzilla” »

JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This JDM styled Toyota Tacoma is brought to us all the way from Hawaii. In fact the 808 state is really heating it up with the
JDM Styled Mini Trucks. The stance of this truck is currently static with the usual springs, bj flip, blocks and removed leaf.
Kicks are Japanese 5Zigen FN01rc wrapped in 205/40/17 brought out to the fenders with 25mm spacers. I really like the
stance on this dropped Toyota Tacoma!

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

“The fronts got 3 inch chassis techs with 1 coil cut. Bj flip and a 1 inch spindle spacer. The rears got middle removed, redrilled
hangers, 5 inch blocks and step notch. Lookin at around 8-9 up front and 10-11 in back.Sittin on 17×10 fn01 rc rims +15”
– SlAMMEdtAC0 on customtaco.com

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

Front Wheel Tucked to the Lip…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This truck gets driven hard, not just for hard parking…

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC

This Tacoma looks good from the rear too

 

JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC JDM Toyota Tacoma Slammed on 5zigen FN01RC

1. Looks good even with no bumper
2. Haulin… Literally
3. Shows Good Indoors
4. Shows good Outdoors too
5. Perfect Stance on this Tacoma!

Specs
– Wheels: 5zigen fn01rc 17×10 25mm spacers
– Tires: 205/40/17

Continue Reading “JDM Truck – JDM Toyota Tacoma Slammed on 17×10 5zigen FN01RC” »

CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla

CST Demon Camber JDM AE100 Toyota Corolla

This model Toyota Corolla is not the most popular model for modifying, yet alone to be stanced. This
Toyota Corolla was caught outside the Fuji Speedway at the HellaFlush Japan Event. It appears to be
wearing 15″ CST Demon Camber wheels; I believe they only came in 15″ and 16″, and I don’t think
16″ Demon Cambers came with multi lug.

CST Demon Camber JDM AE100 Toyota Corolla

Tucking tire all around, looking pretty clean!

CST Demon Camber JDM AE100 Toyota Corolla

Rear view, good amount of of camber on the rear.

Continue Reading “CST Demon Camber Wheels on a Stanced JDM AE100 Toyota Corolla” »

Bagged Volkswagen Vanagon on Gotti Etoile

Volkswagen Vanagon on Gotti Etoile

Lowered Vans get me very excited. Although pictures of this Volkswagen Vanagon have been on the net for a while now on
Airsociety.net, Ive only seen it lately and can’t stop looking at it, I am intrigued. It is bagged, and the complex suspension
has been majorly redone, even the engine has been raised to accomidate the new height.

 

Volkswagen Vanagon on Gotti Etoile

“What’s keeping this car both lifted and lowered at the same time is a set of Air Lift 2500 fronts and 3500 rears. Dual
ViAir 450c compressors sit neatly out back hooked up to a 3 and 5 gallon tank. You read right, dual tanks. He also raised
the 2.0L ABA OBD1 Turbo motor up higher in the engine bay to give him better clearance when aired out. Talk about dedication!”
– Ricky J airsociety.net

 

Volkswagen Vanagon on Gotti Etoile

Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile  Volkswagen Vanagon on Gotti Etoile

1. Up on all 4’s
2. Front Wheel
3. Rear Wheel, who would of thought 11’s would fit?
4. Face redone
5.  Even the bolts got a fresh coat!

Specs
Wheels
– Gotti Etoile (J55A / C)
– 17×8 ~ +25 5×130 Front
– 17×11 ~ +32 5×130 Rear
– 5×112 to 5×130 adapter

Tires
– Front are Nankang NS-IIs 205/45/17s
– Rear tires are Capitol UHP 245/40/17s

Continue Reading “Bagged Volkswagen Vanagon on Gotti Etoile” »

BBS RS 16×10 & 16×9 on BMW E30 – Tight Fitment

BBS RS ON BMW E30 16x10 16x9

A Couple of my friends are building a couple of BMW E30 projects, and they asked me how big of BBS RS’s Can they fit under
thier arches? I said 16×10 and they didnt quite believe me. This E30 was the first car that came to mind. I sent them a link to
this car, and now they are looking for similar specs.

 

BBS RS ON BMW E30 16x10 16x9

These BBS RS are actually C4 Corvette spec running some Adaptec Adapters; 5×120.65 -> 4×100

 

BBS RS ON BMW E30 16x10 16x9

I like the front rake of the car, makes it look aggressive.

 

BBS RS ON BMW E30 16x10 16x9

16×10 BBS RS Rear Rim, just enough lip a really nice fit!

 

BBS RS ON BMW E30 16x10 16x9

“These are them on my car, but don’t expect them to sit the same on your car as I’m running -6 degrees of camber all around”
-User: Byron, stanceworks.com

 

BBS RS ON BMW E30 16x10 16x9 BBS RS ON BMW E30 16x10 16x9 BBS RS ON BMW E30 16x10 16x9 BBS RS ON BMW E30 16x10 16x9 BBS RS ON BMW E30 16x10 16x9

1. Look at that camber, back in the day we called it “Butterfly”
2. Rear tucks to the rim in this shot
3. Gold is Good!
4. Wheres the front lip?
5. For more go to stanceworks.com

 

Specs

Wheels
Front
BBS RS RS025 16×9 et36
27mm 4×100-5×120.67 Adaptec adapters, final et of 9

Rear
BBS RS RS026 16×10 et36
20mm 4×100-5×120.67 Adaptec adapters, final et of 16

Tires
205/40 Falken 512 Front
215/40 Falken 512 Rear

Suspension setup -6 degrees Front and Rear

Continue Reading “BBS RS 16×10 & 16×9 on BMW E30 – Tight Fitment” »

SSR Formula Mesh on Mazda FC RX7 – Clean and Simple

SSR Formula Mesh on Mazda FC RX-7

With everyone trying to get the fattest lip under their fenders, this FC Mazda RX7 is refreshing to look at with it’s nomal fitting
17″ SSR Formula Mesh. This 7 looks like it can be daily driven with no problems due to its civilized fitment.

 

SSR Formula Mesh on Mazda FC RX-7

Wheels are SSR Formula Mesh measuring 17×7 +32F and 17×8+32 Rear. Ichiba Spacers bring the wheels out a bit.

 

SSR Formula Mesh on Mazda FC RX7

Exhaust gasses expelled through Racing Beat Y pipe and Mufflers.

“Powered by max coilovers. dropped 800$ on a brand new pair. good times. …
… oh i love my coils. love the adjustments on it. in back im negative 3 camber in front im negative 2….
rears are 17×8 +32 and fronts are 17×7 +32”
-Celestial_Fc on rx7club.com

 

SSR Formula Mesh on Mazda FC RX7

This pic looks to be pre spacer, still clean.

 

Dandy Tanaka RX7 on SSR Formula Mesh

The first time I saw this FC, I though about the Dandy Tanaka Salt Flat RX7 which also blue with SSR Formula Mesh

 

Nardi Classic Steering Wheel Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 SSR Formula Mesh on Mazda FC RX7 Mazda FC RX7

1. Interior Sports a Nardi Classic in Leather
2. 25mm Ichiba spacers sittin flush
3. SSR Formula Mesh not mounted yet
4. Car brought down with Max Coilovers
5. Stock on Coilovers

 

Specs
Mazda RX7 FC
Wheels: SSR Formula Mesh 17×8 +32R fronts, 17×7 +32F with Ichiba v.2 spacers 25mm
Tires: 215/45/17
Exhaust: Racing Beat Y pipe and Mufflers
Suspension: Max Coilovers
Interior: Nardi Claasic Leather
Exterior: S5 Round Tail Lights

Continue Reading “SSR Formula Mesh on Mazda FC RX7 – Clean and Simple” »